Pipe Thermal Expansion

Post Reply
flishaa
Posts: 1
Joined: Thu Jul 23, 2020 5:29 am

Pipe Thermal Expansion

Post by flishaa »

Dears,

I have used ASME 31.3 Code which the thermal expansion start at 20C as zero expansion, but when I calculate py Start Prof I found that the Zero point at 0C.
Is there any setting to modify it?

Thank you

Mohamed
User avatar
Alex Matveev
Posts: 13
Joined: Mon Jun 22, 2020 12:48 pm
Contact:

Re: Pipe Thermal Expansion

Post by Alex Matveev »

Hello, Mohamed

Yes, sure. You can modify it in project settings:
2020-07-23_19-38-50.png
2020-07-23_19-38-50.png (154.75 KiB) Viewed 200 times
And also you can set individual ambient temperature for each operation mode:
2020-07-23_19-39-14.png
2020-07-23_19-39-14.png (161.91 KiB) Viewed 200 times
Post Reply